zBoost
®
ZB545 Manual
6
Setting Up Your zBoost Signal Booster
FIRST: Mount the External Antenna
Choosing the best location for the External Antenna provides
the best performance and the largest area of improved signal.
Choose a location for the External Antenna using your cell phone
to determine the area of strongest signal - typically found outside,
above the rooine or in an attic. The antenna must also remain
at least 3 feet from any metal objects such as pipes, metal
siding, A/C unit etc. and at lease 15 vertical feet above the Panel
Antenna.
Identify the best location for attachment of the mounting bracket
– such as an attic cross or main beam. Secure the mounting
bracket at the highest possible point.
Position the mounting bracket such that the External Antenna
will be vertical and attach the External Antenna. See “Antenna Bracket Assembly” below for more
information.
Antenna Bracket Assembly
IMPORTANT: Incorrectly mounting the External Antenna to the
mounting bracket (see gure A) will impede performance. Ensure
that the External Antenna is properly positioned in the mounting
bracket as pictured below.
To mount External Antenna to a pole: Attach antenna to pole
bracket as pictured. Use U-Bolt to secure bracket to pole and
fasten. DO NOT mount to a metal pole.
To mount External Antenna to a at surface: Attach antenna to
pole bracket as pictured. Secure bracket to desired surface using
provided screws. Use of the Saddle and U-Bolt are not necessary
for this option.
SECOND: Place the zBoost Base Unit where you want to create a Cell Zone
TM
Connect the Indoor Antenna to the Base Unit and place it where you need signal. For the widest
possible signal area, position the Base Unit near the middle of a room. You may also mount it on an
interior wall by rst removing the bracket, screwing the bracket to a wall (screws not included), then
snapping the Base Unit back in place keeping the Indoor Antenna vertical. The Base Unit uses an
omni-directional Indoor Antenna that delivers signal in a circular pattern around the antenna.
The zBoost requires at least 15 feet of vertical separation between the Base Unit and the External
Antenna. Generally, increasing this distance (up to 40 feet) will increase the performance and
decreasing the distance will limit the performance.
Keep the Base Unit off the oor and at least 2 feet away from other cords, metal objects or other
wireless devices such as wireless routers or wireless access points. The zBoost performs best
when there are no obstructions between the zBoost Base Unit and your mobile device.
Adequate Performance
Best Performance (Recommended)
15’ of vertical
separation
15’ of vertical
separation
15’ of vertical
separation
Figure A
(22 Seiten)
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern